feat: scan-modal polish, Pine 1.2.0 copy, bitcoind RPC creds off argv
Demo images / Build & push demo images (push) Failing after 2m53s
Demo images / Build & push demo images (push) Failing after 2m53s
- Wallet scan modal: fallback buttons no longer flash on open (spinner while the camera auto-starts, video hidden until live — also kills the Android WebView play-glyph), decode rate 10/s -> 4/s (preview visibly lagged on phones), clear messages for BOLT12 offers and LNURL/lightning addresses (unsupported by the LND backend; full LNURL-pay is a queued feature), zero-amount invoices in BIP21 URIs prefill from amount=. - Pine 1.2.0: launch-page copy reflects the auto-seeded HA wiring (only speaker pairing stays manual), adds the ask-Archy hint and the silent-answers power-cycle troubleshooting tip (firmware FIFO bug). - bitcoin-core/knots: rpcuser/rpcpassword move from bitcoind argv (world- readable in host ps) to a 0600 config file inside the container tmpfs; the salted txrelay rpcauth hash stays on argv. Catalog regenerated. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
This commit was merged in pull request #102.
This commit is contained in:
Dorian
@@ -35,6 +35,9 @@ app:
|
||||
fi;
|
||||
RPC_USER="$(printenv BITCOIN_RPC_USER)";
|
||||
RPC_PASS="$(printenv BITCOIN_RPC_PASS)";
|
||||
RPC_CONF="/tmp/rpc.conf";
|
||||
umask 077;
|
||||
printf "rpcuser=%s\nrpcpassword=%s\n" "$RPC_USER" "$RPC_PASS" > "$RPC_CONF";
|
||||
RPC_TXRELAY_AUTH="$(printenv BITCOIN_RPC_TXRELAY_RPCAUTH || true)";
|
||||
DISK_GB_VALUE="$(printenv DISK_GB || true)";
|
||||
RPC_HEADROOM="-rpcthreads=16 -rpcworkqueue=256";
|
||||
@@ -43,9 +46,9 @@ app:
|
||||
RPC_TXRELAY_FLAGS="$RPC_TXRELAY_FLAGS -rpcauth=$RPC_TXRELAY_AUTH -rpcwhitelist=txrelay:sendrawtransaction,submitpackage,testmempoolaccept,getmempoolinfo,getrawmempool,getmempoolentry,getnetworkinfo,getblockchaininfo,getblockcount,getblockhash,getblock,getblockheader,getrawtransaction,gettxout,gettxspendingprevout,decoderawtransaction,decodescript,estimatesmartfee,uptime,ping,getconnectioncount,getpeerinfo,getindexinfo,getdeploymentinfo,getchaintips";
|
||||
fi;
|
||||
if [ "${DISK_GB_VALUE:-0}" -lt 1000 ]; then
|
||||
exec "$BITCOIND" -datadir=/home/bitcoin/.bitcoin -noconf -printtoconsole=0 -server=1 -prune=550 -rpcallowip=0.0.0.0/0 -rpcbind=0.0.0.0:8332 -listen=1 -bind=0.0.0.0:8333 -dbcache=1024 -par=0 -maxconnections=125 $RPC_HEADROOM $RPC_TXRELAY_FLAGS -rpcuser="$RPC_USER" -rpcpassword="$RPC_PASS";
|
||||
exec "$BITCOIND" -datadir=/home/bitcoin/.bitcoin -conf="$RPC_CONF" -printtoconsole=0 -server=1 -prune=550 -rpcallowip=0.0.0.0/0 -rpcbind=0.0.0.0:8332 -listen=1 -bind=0.0.0.0:8333 -dbcache=1024 -par=0 -maxconnections=125 $RPC_HEADROOM $RPC_TXRELAY_FLAGS;
|
||||
else
|
||||
exec "$BITCOIND" -datadir=/home/bitcoin/.bitcoin -noconf -printtoconsole=0 -server=1 -txindex=1 -rpcallowip=0.0.0.0/0 -rpcbind=0.0.0.0:8332 -listen=1 -bind=0.0.0.0:8333 -dbcache=4096 -par=0 -maxconnections=125 $RPC_HEADROOM $RPC_TXRELAY_FLAGS -rpcuser="$RPC_USER" -rpcpassword="$RPC_PASS";
|
||||
exec "$BITCOIND" -datadir=/home/bitcoin/.bitcoin -conf="$RPC_CONF" -printtoconsole=0 -server=1 -txindex=1 -rpcallowip=0.0.0.0/0 -rpcbind=0.0.0.0:8332 -listen=1 -bind=0.0.0.0:8333 -dbcache=4096 -par=0 -maxconnections=125 $RPC_HEADROOM $RPC_TXRELAY_FLAGS;
|
||||
fi
|
||||
derived_env:
|
||||
- key: DISK_GB
|
||||
|
||||
@@ -35,6 +35,9 @@ app:
|
||||
fi;
|
||||
RPC_USER="$(printenv BITCOIN_RPC_USER)";
|
||||
RPC_PASS="$(printenv BITCOIN_RPC_PASS)";
|
||||
RPC_CONF="/tmp/rpc.conf";
|
||||
umask 077;
|
||||
printf "rpcuser=%s\nrpcpassword=%s\n" "$RPC_USER" "$RPC_PASS" > "$RPC_CONF";
|
||||
RPC_TXRELAY_AUTH="$(printenv BITCOIN_RPC_TXRELAY_RPCAUTH || true)";
|
||||
DISK_GB_VALUE="$(printenv DISK_GB || true)";
|
||||
RPC_HEADROOM="-rpcthreads=16 -rpcworkqueue=256";
|
||||
@@ -43,9 +46,9 @@ app:
|
||||
RPC_TXRELAY_FLAGS="$RPC_TXRELAY_FLAGS -rpcauth=$RPC_TXRELAY_AUTH -rpcwhitelist=txrelay:sendrawtransaction,submitpackage,testmempoolaccept,getmempoolinfo,getrawmempool,getmempoolentry,getnetworkinfo,getblockchaininfo,getblockcount,getblockhash,getblock,getblockheader,getrawtransaction,gettxout,gettxspendingprevout,decoderawtransaction,decodescript,estimatesmartfee,uptime,ping,getconnectioncount,getpeerinfo,getindexinfo,getdeploymentinfo,getchaintips";
|
||||
fi;
|
||||
if [ "${DISK_GB_VALUE:-0}" -lt 1000 ]; then
|
||||
exec "$BITCOIND" -datadir=/home/bitcoin/.bitcoin -noconf -printtoconsole=0 -server=1 -prune=550 -rpcallowip=0.0.0.0/0 -rpcbind=0.0.0.0:8332 -listen=1 -bind=0.0.0.0:8333 -dbcache=2048 -par=0 -maxconnections=125 $RPC_HEADROOM $RPC_TXRELAY_FLAGS -rpcuser="$RPC_USER" -rpcpassword="$RPC_PASS";
|
||||
exec "$BITCOIND" -datadir=/home/bitcoin/.bitcoin -conf="$RPC_CONF" -printtoconsole=0 -server=1 -prune=550 -rpcallowip=0.0.0.0/0 -rpcbind=0.0.0.0:8332 -listen=1 -bind=0.0.0.0:8333 -dbcache=2048 -par=0 -maxconnections=125 $RPC_HEADROOM $RPC_TXRELAY_FLAGS;
|
||||
else
|
||||
exec "$BITCOIND" -datadir=/home/bitcoin/.bitcoin -noconf -printtoconsole=0 -server=1 -txindex=1 -rpcallowip=0.0.0.0/0 -rpcbind=0.0.0.0:8332 -listen=1 -bind=0.0.0.0:8333 -dbcache=4096 -par=0 -maxconnections=125 $RPC_HEADROOM $RPC_TXRELAY_FLAGS -rpcuser="$RPC_USER" -rpcpassword="$RPC_PASS";
|
||||
exec "$BITCOIND" -datadir=/home/bitcoin/.bitcoin -conf="$RPC_CONF" -printtoconsole=0 -server=1 -txindex=1 -rpcallowip=0.0.0.0/0 -rpcbind=0.0.0.0:8332 -listen=1 -bind=0.0.0.0:8333 -dbcache=4096 -par=0 -maxconnections=125 $RPC_HEADROOM $RPC_TXRELAY_FLAGS;
|
||||
fi
|
||||
derived_env:
|
||||
- key: DISK_GB
|
||||
|
||||
+10
-5
@@ -1,7 +1,7 @@
|
||||
app:
|
||||
id: pine
|
||||
name: Pine
|
||||
version: "1.1.1"
|
||||
version: "1.2.0"
|
||||
description: A private voice assistant for your home. Pine runs speech-to-text (Whisper) and text-to-speech (Piper) on your own node and pairs with a PineVoice satellite speaker, so Home Assistant Assist works locally with nothing sent to the cloud.
|
||||
category: home
|
||||
|
||||
@@ -174,10 +174,15 @@ app:
|
||||
<div id="log">Ready. Click the button, then pick “PineVoice” in the Bluetooth popup.</div>
|
||||
</div>
|
||||
|
||||
<p class="ha">After WiFi joins, add the speaker to Home Assistant:
|
||||
<b>Settings → Devices & services → Add Wyoming Protocol</b>, host =
|
||||
the speaker’s IP, port <b>10700</b>, then pick an Assist pipeline using
|
||||
Whisper + Piper. Wake word: <b>“Hey Jarvis.”</b></p>
|
||||
<p class="ha">After WiFi joins, one manual step remains — pair the
|
||||
speaker in Home Assistant: <b>Settings → Devices & services →
|
||||
Add Wyoming Protocol</b>, host = the speaker’s IP, port
|
||||
<b>10700</b>. Whisper, Piper and the Assist pipeline are wired up
|
||||
automatically when Pine installs. Wake word: <b>“Hey Jarvis.”</b>
|
||||
You can also ask node things like <i>“what’s the block height?”</i></p>
|
||||
<p class="ha">Troubleshooting: if it hears you (LED reacts) but answers
|
||||
are silent, unplug and replug the speaker — an interrupted answer can
|
||||
wedge its audio output until it reboots.</p>
|
||||
</div>
|
||||
|
||||
<script>
|
||||
|
||||
Reference in New Issue
Block a user