Adds a verification checklist (service running, nodogsplash bound to
br-tollgate not br-lan via the rendered config not just UCI, LAN/SSH
untouched, mint probes succeeding) plus notes on the dev-build test-mint
injection and the default-route race between a router's LAN interface
and the node's other uplinks before the router's own WAN/WISP is live.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0176RpCxFNS9ZaSJjL72W9Z5
Archipelago's Connect form only authenticates with an existing password;
it has no flow for setting one on a fresh, passwordless router. On the
node's kiosk display there's no visible tab bar, so Ctrl+T to open a new
tab to LuCI is the way to set it before Connect will work.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0176RpCxFNS9ZaSJjL72W9Z5
The install code was hardcoded to the Oct 2025 v0.2.0 release —
nine releases behind. Its changelog covers exactly the failures hit
live against archy-x250-pa3: a mint with an empty/broken keyset
crash-looped tollgate-wrt forever (v0.5.0 adds "graceful degradation
when Cashu mints fail"), and the bundled captive-portal JS had zero
CBOR support, hard-rejecting the cashuB (NUT-00 V4) tokens modern
wallets like Minibits generate by default.
Also: v0.5.0 publishes native .apk packages for aarch64_cortex-a53
and x86_64. install_tollgate_apk_native now prefers those directly
(apk add handles deps/postinst/uci-defaults itself) instead of always
falling back to the manual ar/tar .ipk extraction dance, which only
exists because earlier releases had no native apk build at all.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0176RpCxFNS9ZaSJjL72W9Z5
Observed live on archy-x250-pa3: right after WAN reconnects (fresh
boot or WAN reconfigure), the first Install attempt can fail with
"apk update failed ... router may have no internet access" purely
because the WiFi-uplink STA association hasn't finished yet — it's
not a real error, just retry a few seconds later. Also cross-referenced
the now-fixed /usr/bin/opkg hardcoding bug for anyone hitting it on an
older build.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0176RpCxFNS9ZaSJjL72W9Z5
provisionTollgate/saveTollgateConfig/scanWifi/configureWan all fell
back to the Connect form's local refs (host/sshUser/sshPassword) when
connectedParams was null. Those refs only get populated if the form
was actually submitted this session — on a normal page load the
router reconnects via the server-persisted config instead, leaving
sshPassword at its default ''. Sending that as an explicit
(empty-but-present) ssh_password overrides the backend's saved-config
fallback, so every action auths with a blank password instead of the
real saved one.
Added authParams(): omit host/ssh_user/ssh_password entirely unless
connectedParams is actually set, same as the status poll already does.
Caught live: dropbear on archy-x250-pa3's router logged a single bad
password attempt at the exact moment "Install TollGate" was clicked,
sandwiched between periodic status-poll connections succeeding with
the real saved password.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0176RpCxFNS9ZaSJjL72W9Z5
opkg_check() and every opkg/apk invocation hardcoded /usr/bin/opkg and
/usr/bin/apk. Official OpenWrt images don't all symlink /bin into
/usr/bin — the glinet_gl-mt3000 24.10.2 build keeps them as separate
real directories with opkg living in /bin — so the check silently
missed a perfectly normal install and TollGate provisioning failed
with "this router's firmware may not support package management".
Switched every call to resolve through the router's own $PATH
(command -v / bare opkg / apk) instead. Reproduced and fixed live
against archy-x250-pa3, 2026-09-05.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0176RpCxFNS9ZaSJjL72W9Z5
Step 4 described a single "Provision TollGate" action that prompts for
price/step/mint upfront. The real UI (OpenWrtGateway.vue) doesn't work
that way: "Install TollGate" is a one-click action with no config form
that installs with defaults, and price/step/mint/enabled are only
editable afterward via a separate "Edit" panel. Caught while walking
through a live install.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0176RpCxFNS9ZaSJjL72W9Z5
Worked example for the Beryl AX (GL-MT3000, mediatek/filogic) verified
against the OpenWrt wiki and firmware selector: exact sysupgrade image
filename, GL.iNet UI / LuCI flash path, post-flash SSH state, and the
U-Boot recovery procedure if the flash goes sideways.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0176RpCxFNS9ZaSJjL72W9Z5
Walks a node operator through pairing an OpenWrt router over SSH,
running the WAN/WISP wizard, and provisioning TollGate pay-as-you-go
WiFi — plus an RPC/architecture reference for developers. Distills
the openwrt crate, RPC handlers, and Vue panel into user-facing steps
that didn't exist anywhere in docs/ before.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0176RpCxFNS9ZaSJjL72W9Z5
The previous commit on this branch copied cuprated's raw
--generate-config defaults (stdout=info, file=debug, max_log_files=7)
verbatim. Turns out that's the wrong reference: compared against
ssmithx@archy-dev-pa:/home/ssmithx/cuprate/Cuprated.toml — the actual
dev config this app was built and tested against — file logging is
meant to run at "info" with 14 rotated files, not the binary's raw
"debug"/7. Confirmed live on amishparadise: podman logs (stdout) was
already clean at info, but the on-disk file log
(.local/share/cuprate/logs/<date>) was flooding with per-peer DEBUG
gossip (~400KB in 2 minutes) because it inherited the binary default
instead of the intended one.
Left the resource-tuning knobs in the reference config (8GB
target_max_memory, tokio/rayon thread counts, P2P connection counts,
explicit reader_threads) out of this file — those were sized for
ssmithx's dev box and don't apply here; this manifest's
target_max_memory already stays deliberately under the container's
4Gi memory_limit.
Regenerated releases/app-catalog.json (still unsigned).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Ga6N8Jk1YdCTMMX1LjDpAr
apps/cuprate/manifest.yml only ever wrote network/target_max_memory/
rpc.restricted.enable into Cuprated.toml, so the [tracing.stdout] and
[tracing.file] tables were silently absent — cuprated still applied
its built-in info/debug/7 defaults, but nothing on disk showed it.
Verified live on amishparadise 2026-09-01: the deployed 5-line file
had no [tracing] section at all, and the level was only discoverable
by running `cuprated --generate-config` and diffing.
Add both tables to the manifest's files[].content with the same
values cuprated already defaults to, so every new install ships a
Cuprated.toml an operator can actually read and tune. overwrite:false
means already-deployed nodes (amishparadise included) keep their
existing file untouched — this only changes what fresh installs get.
Regenerated releases/app-catalog.json (unsigned) to embed the updated
manifest; needs scripts/sign-catalog.sh before it's authoritative for
the fleet.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Ga6N8Jk1YdCTMMX1LjDpAr
Flags the app update policy already noted as unresolved in
app-developer-guide.md, adds a section for SSH access strategy, and
starts an app wishlist (Cashu wallet, phoenixd) for packaging.
The federation fallback in the plain content-inline path wasn't enough —
mesh.transport-advice recommended the "resource-mesh" tier purely from our
own device being Reticulum-capable, without checking that THIS peer
actually has a radio route. For a federation-only contact (no radio twin)
that steered the frontend into send-content-inline's Reticulum
resource-transfer path, which has no dest_prefix to send to and fails with
"Peer is federation-only (no radio twin)" — reproduced after deploying the
first fix on a live node.
Adds MeshService::has_radio_route(contact_id), and gates both the
"resource-mesh" tier in mesh.transport-advice and the resource-transfer
branch in mesh.send-content-inline on it. Federation-only peers now fall
through to the has_tor branches, which route the frontend to
mesh.send-content (already correctly federation-aware) instead.
Landed from PR #133 (re-committed to drop private host details from the
original message; content identical).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
mesh.send-content-inline always called send_typed_wire (the LoRa/radio
path), which fails with "Peer is federation-only (no radio twin)" for
any contact reachable only via Tor federation — reproduced sending a
picture from the companion app to a federation-only peer. mesh.send-content
already resolves the peer's federation onion and falls back to
send_typed_wire_via_federation; mirror that same lookup here.
Landed from PR #133 (re-committed to drop private host details from the
original message; content identical).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Full-node daemon: P2P + Monero's own restricted RPC (the safe-for-public
subset wallets use as a "remote node") are auth:none like bitcoin/electrumx's
equivalents; unrestricted RPC (full node control) stays gated auth:local.
readonly_root works cleanly since the upstream image is FROM scratch with
ownership fixed at build time — no runtime chown/setuid needed, unlike
bitcoin-knots/core.
Verified locally end-to-end before committing: built the upstream Dockerfile,
confirmed the generated Cuprated.toml against `cuprated --generate-config`/
`--dry-run`, and ran the real image with the manifest's exact ports/volumes —
including discovering that cuprated's own 127.0.0.1-default RPC bind is
unreachable through a published host port and needs to bind 0.0.0.0
internally with ports[].bind:127.0.0.1 doing the actual restriction, the
same pattern bitcoin-knots' RPC port already uses in this repo.
Bumps the unauthenticated_ports_are_all_accounted_for canary (26 -> 28) for
cuprate's two auth:none ports, per that test's own review-before-updating
contract.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ssmithxandClaude Sonnet 5