- WISP wizard: step-by-step flow for WiFi, DHCP, masquerade config
- WAN status: expose lan_ip, dhcp_start/limit, masq, sta_state, wifi_log
- wifi_scan: detect CCMP as WPA2 (psk2) so association succeeds
- opkg: PkgManager enum — detect apk-native mode when opkg not in repos
- tollgate: apk-native install path using manual ipk extraction
- arch detection: read DISTRIB_ARCH from /etc/openwrt_release; normalise
bare mipsel/mips from uname -m to mipsel_24kc/mips_24kc
- install_ipk: install binutils via apk when ar not in BusyBox
- install_ipk: wget --no-check-certificate for routers without CA bundle
- install_ipk: ar fallback to tar -xzf for non-standard ipk formats
- install_ipk: 5MB overlay space check with clear user-facing error
- middleware: allow "Not enough flash/space" errors through sanitizer
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
apk errors were being silently dropped (stdout only). Run apk update
first and fail with a clear "router may have no internet" message if
it fails, rather than a cryptic exit-1 from apk add.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
OpenWrt 25.x switched from opkg to apk as the default package manager,
so devices like the Cudy TR1200 on 25.12.4 don't have /usr/bin/opkg.
When opkg is missing but apk is present, install opkg through apk first
so the rest of the provisioning flow can proceed unchanged.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
`channel.exec()` doesn't source the shell profile, so PATH may not
include /usr/bin on some routers. Using /usr/bin/opkg explicitly
avoids exit-127 surprises. Added opkg_check() to give a clear error
("firmware may not support package management") before attempting
opkg_update, rather than a confusing "command not found" exit code.
Also split the BusyBox-hostile `grep -v 'all\|noarch'` into two
separate greps for the arch-detection fallback.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New `archipelago-openwrt` workspace crate provides SSH/UCI-based management
of OpenWrt routers, including automated TollGate installation and configuration
of a pay-as-you-go "archipelago" SSID backed by the local Cashu mint.
Exposes two RPC endpoints:
- `openwrt.scan` — discover OpenWrt routers on the LAN
- `openwrt.provision-tollgate` — install tollgate-module-basic-go, write UCI
config (TIP-01/TIP-02), and create isolated WiFi SSID + firewall zone
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
