BackButton is presentational-only (emits click, parent wires navigation)
per its own doc comment, but OpenWrtGateway.vue rendered it with no
@click handler at all -- clicking it did nothing. Added useRouter +
goBack() (-> the 'server' route, matching the page's location under
views/server/), same pattern as PeerFiles.vue/CloudFolder.vue.
Router-detection (openwrt.scan) spot-checked live: RPC plumbing works
end-to-end and returns a valid response, but no physical OpenWrt device
was on hand to confirm a true-positive detection. Also noted:
detect::scan_subnet does blocking TCP/SSH calls inside an async fn with
no .await points -- not proven to cause a real issue yet, but worth
hardening (spawn_blocking or async I/O) before a large subnet scan is
exercised for real.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Several compounding bugs were blocking end-to-end TollGate provisioning
on OpenWrt 25.x (apk-native) routers:
- install_ipk's non-ar fallback assumed a flat tarball, but some .ipks are
a gzip tar of the three classic ipk members one level deep; it was
dumping debian-binary/data.tar.gz/control.tar.gz straight into / instead
of unpacking the real payload.
- Manually-extracted packages never ran their pending /etc/uci-defaults/*
scripts (that only happens through opkg/apk's own postinst bookkeeping),
so nothing ever created /etc/config/tollgate.
- uci_apply() never ensured the target config file existed first — `uci
set` fails outright on a config namespace nothing has created yet, which
is true for a package-defined one like "tollgate" (unlike wireless/
network/dhcp, which ship by default).
- The installed-check and restart_services looked for a binary/init script
named after the opkg package ("tollgate-module-basic-go"/"tollgate"),
but the real on-disk names are tollgate-wrt — so status always reported
"not installed" and service restarts silently no-op'd.
- provision_ssid used `uci add`, creating a new wifi-iface section (and
therefore a new duplicate broadcast SSID) on every provision call instead
of updating one in place.
Also adds a TollGateConfig.enabled field so the enable/disable state is
actually applied to the running service and the SSID's own broadcast
(stop + disable at boot, or start + enable), not just written to UCI.
On the frontend, the OpenWrt Gateway page's TollGate panel was read-only
once installed — add an edit form (price, step size, min steps, mint URL,
enabled toggle) that reuses the same idempotent provision-tollgate call.
- WISP wizard: step-by-step flow for WiFi, DHCP, masquerade config
- WAN status: expose lan_ip, dhcp_start/limit, masq, sta_state, wifi_log
- wifi_scan: detect CCMP as WPA2 (psk2) so association succeeds
- opkg: PkgManager enum — detect apk-native mode when opkg not in repos
- tollgate: apk-native install path using manual ipk extraction
- arch detection: read DISTRIB_ARCH from /etc/openwrt_release; normalise
bare mipsel/mips from uname -m to mipsel_24kc/mips_24kc
- install_ipk: install binutils via apk when ar not in BusyBox
- install_ipk: wget --no-check-certificate for routers without CA bundle
- install_ipk: ar fallback to tar -xzf for non-standard ipk formats
- install_ipk: 5MB overlay space check with clear user-facing error
- middleware: allow "Not enough flash/space" errors through sanitizer
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
get_wan_status now returns: radio0_disabled, sta_iface (from iw dev),
sta_state (operstate), assoc_ssid (actually associated SSID vs
configured), and recent wifi_log lines from logread. The WAN panel
shows a diagnostic grid when configured but not connected so the user
can see exactly what's wrong without digging into server logs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New RPC methods:
- openwrt.scan-wifi: triggers iwinfo scan on the router radio,
returns networks sorted by signal strength
- openwrt.configure-wan: creates UCI wireless.wwan (sta mode) +
network.wwan (DHCP) + adds wwan to firewall WAN zone, then
calls `wifi reload`
get-status now includes a `wan` object with configured/ssid/ip/
internet fields so the UI can show current uplink state.
Frontend WAN panel: scan → pick SSID (signal bars) → enter password
→ apply. Shows "Configure WAN first" hint above TollGate install
button when internet is not available.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace bg-white/5 card containers with glass-card (rgba(0,0,0,0.65) +
backdrop-blur), match input styling to Login.vue, and use glass-button
variants for actions. Fixes low contrast against the background image.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- OpenWrtGateway.vue: add "Install TollGate" button when not installed;
tracks connected credentials for reuse in the provision call
- install.rs: fall back to wget download from GitHub releases when the
package is not in any opkg feed (mips_24kc and other arches supported)
- openwrt.rs: provision-tollgate now falls back to saved router_config
for credentials, matching the behaviour of get-status
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Backend: new `openwrt.get-status` RPC endpoint SSHes into the saved (or
provided) OpenWrt router and returns system info, TollGate config, and WiFi
AP interfaces via UCI.
Frontend: new OpenWrtGateway.vue view at /dashboard/server/openwrt shows
system hostname, OpenWrt version, uptime, TollGate install/enable state with
pricing and mint URL, and all AP-mode WiFi interfaces. Linked from the Local
Network section of the Server view.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
