All hardcoded references to the old IP-based registry replaced across
Rust backend, Vue frontend, shell scripts, Dockerfiles, CI, and docs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Unbundled ISO: first-boot only creates FileBrowser (marker file .unbundled)
Users install apps from Marketplace — no more bitcoin/mempool on clean install
- VPN status: read tunnel IP from config file (instant) instead of nvpn status (22s)
- Kiosk: App.vue skips remote relay on /kiosk path (prevents duplicate input)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Update all references from Debian 12 (Bookworm) to Debian 13 (Trixie)
- Enable SystemCallArchitectures, RestrictAddressFamilies, RestrictRealtime
in archipelago.service (safe on systemd 256+ which respects NoNewPrivileges=no)
- Update GLIBC compatibility checks from 2.36 to 2.40
- ISO filename, build container, and docs updated throughout
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Standalone WireGuard (wg0:51820):
- New archipelago-wg.service creates wg0 independent of NostrVPN
- Keypair generated on first-boot, persisted on LUKS partition
- vpn.create-peer uses wg genkey/pubkey (no nvpn dependency)
- wg-address service depends on archipelago-wg, not nostr-vpn
Networking fixes:
- Remove nos.lol from default relays (requires PoW, events rejected)
- Add Tor hidden service for private relay (port 7777) — NAT'd peers
can reach relay over Tor for NostrVPN signaling
- Fix Tor hostname sync race: wait loop before copying hostname files
- Add tor-hostnames + wireguard dirs to LUKS partition setup
- Include relay in hostname sync loops (setup-tor.sh + first-boot)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The nvpn daemon config at /var/lib/archipelago/nostr-vpn/ is owned by
root, but the backend runs as archipelago. Direct write silently failed,
so adding a second phone's npub never reached the daemon — service
restarted with stale config. Now falls back to sudo cp for root-owned
paths, and first-boot sets ownership to archipelago.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add nostr-rs-relay as native system service (port 7777) for VPN
signaling. Every node runs its own private relay from first boot.
Update nvpn binary from v0.3.4 to v0.3.7 (fixes mesh event
processing). Add WireGuard helper and address service for peer VPN.
First-boot script configures relay, nvpn identity, relay URLs
(direct + Tor onion), and syncs daemon config.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- VPN card: relay URLs, device management, invite QR, add participant
- Backend: vpn.invite, vpn.add-participant, vpn.peer-config RPCs
- nvpn v0.3.7 system service (fixes event processing bug in v0.3.4)
- First-boot: auto-configure nvpn with node identity and endpoint
- Service: AF_NETLINK for WireGuard, NoNewPrivileges=no for sudo wg
- TASK-50: networking stack reliability from first install
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add NostrVPN as a native systemd service (extracted from container)
- Add VPN status detection for nostr-vpn in backend vpn.rs
- ISO build extracts nvpn binary from container image
- First-boot auto-configures NostrVPN with node's Nostr identity
- Change Claude Auth from login iframe to API key input field
- Remove duplicate ChangePasswordSection from Settings.vue
- FIPS and Routstr remain as installable container apps
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace hardcoded /run/user/1000 with $(id -u archipelago) so first-boot
works regardless of the archipelago user's UID.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
bitcoin.conf already has server=1, rpcbind=0.0.0.0, rpcallowip, listen.
Passing them again via command-line causes bitcoin to try binding port
8332 twice → "Address already in use" → container crashes on every start.
Now only passes pruning/txindex args and dbcache via CLI.
Health check uses cookie auth (-datadir) instead of plaintext password.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add firmware-linux-nonfree to ISO (fixes missing Realtek NIC firmware)
- Pre-create nbxplorer/Main and btcpay/Main data directories
- Fix fedimint data dir permissions (chmod 775 for non-root container)
- GRUB GFX fallback: gfxpayload=keep + console fallback for incompatible hardware
- Kill stale Chromium before kiosk restart (prevents duplicate processes)
- Suppress Rust warnings: #[allow(dead_code)] on run_boot_reconciliation,
#[allow(unused_assignments)] on history_dirty
- Version bump to 1.3.3
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Pre-create Documents/Photos/Music/Downloads/Builds dirs for FileBrowser
- Add "Already set up? Log in" link on onboarding intro page
- Prevents users from getting stuck in onboarding loop
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Onboarding:
- Persist current step in localStorage — page refresh resumes where user was
- Router afterEach saves step; guard redirects to saved step, not always intro
- Show npub alongside DID on restore success screen
UI fixes:
- Clipboard polyfill for HTTP contexts (fixes Copy DID crash on non-HTTPS)
- AppCard installing overlay shows for pkg.state=installing (survives refresh)
- Hide uninstall button during installation
- Frontend version bumped to 1.3.2
App store:
- OnlyOffice fully removed from marketplace, curated apps, app config
- Replaced with CryptPad references throughout
- Remove OnlyOffice from ISO capture patterns
Container stability:
- UI containers (bitcoin-ui, lnd-ui, electrs-ui) pull from registry first
- Added --cap-add FOWNER for rootless Podman compatibility
- electrs-ui now included in first-boot loop alongside bitcoin-ui and lnd-ui
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Bitcoin Knots needs more memory headroom (was OOMing at 2g during IBD).
Reduce dbcache from 4096 to 2048 on large disks to stay within the 4g
container limit. Low-memory systems get 2g (was 1g).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Container stability:
- Merge scan results instead of full replacement (prevents UI flapping)
- Absence threshold: 3 consecutive missed scans before removing from state
- container-list RPC uses cached scanner state for consistency
- Increased Podman API timeout 30s → 60s (scanner + health monitor)
- Keep crashed containers visible as "exited" instead of podman rm -f
- Resolve host-gateway IP via ip route (podman 4.3.x compatibility)
ISO build fixes:
- AIUI web app inclusion: searches 5 paths + CI step to copy from build server
- Claude API proxy: systemctl enable with symlink fallback
- AIUI nginx: try_files =404 (was /aiui/index.html redirect loop)
- Build version set to 1.3.0
Container fixes:
- lnd-ui: nginx listens on 8080 (was 80, Permission denied in rootless)
- first-boot: image-versions.sh sourced from correct path with validation
- first-boot: host-gateway resolved to actual gateway IP
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Bitcoin UI and Electrs UI proxy API calls to 127.0.0.1 services
(Bitcoin RPC on 8332, backend on 5678). With port-mapped containers,
127.0.0.1 is the container's own localhost — the proxy fails and UIs
show "Unable to connect to Bitcoin node".
Fix: bitcoin-ui and electrs-ui use --network host (internal ports
8334 and 50002 don't conflict with host nginx on 80/443). LND UI
stays port-mapped (-p 8081:80) because port 80 would conflict.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Bitcoin UI listens on 8334 internally (not 80), Electrs UI on 50002.
Port mappings must match: -p 8334:8334 and -p 50002:50002.
Also adds missing electrs-ui to the UI container list.
Removes --network host for bitcoin-ui which conflicted with nginx.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Backend:
- Add --add-host host.containers.internal:host-gateway to LND and Bitcoin
Knots containers (fixes DNS resolution failure in rootless podman)
- Add --user 0:0 and DAC_OVERRIDE to nginx UI sidecar containers
(fixes chown crash in rootless podman for bitcoin-ui, electrs-ui, lnd-ui)
- Add hostadd to Rust Podman API client for web UI container installs
- Add Chromium privacy flags to kiosk launcher (disable telemetry)
Frontend:
- Fix onboarding reset on raw IP visits (trust localStorage as first-class
signal, skip boot screen when server is up but not onboarded)
- Fix seed regression: persist challenge indices in sessionStorage so going
back from Verify doesn't change which words are asked
- Remove glass container from seed Generate/Verify/Restore screens
- Add Back button to Restore from Seed screen
- Replace Network card: Tor (purple), VPN status (orange), Bitcoin sync (orange)
- Add ElectrumX to curated app list with correct .webp icon
- Install flow: navigate to My Apps immediately with toast, hide
installed/installing apps from marketplace and discover views
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
LND crashes with "netlinkrib: address family not supported by protocol"
in rootless podman because it needs NET_RAW to enumerate network
interfaces during TLS certificate generation. Added to capabilities
in config.rs, first-boot-containers.sh, and container-specs.sh.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
LND v0.18+ crashes with "netlinkrib: address family not supported"
because rootless podman blocks netlink access for TLS cert SAN
enumeration. Fix: add tlsextraip=0.0.0.0 and tlsextradomain=lnd
to lnd.conf so LND skips interface enumeration.
Also: fix status label to show "crashed" for both exited and
stopped containers with non-zero exit codes (previously only
caught "exited" state, but podman reports "stopped" for
restart-looping containers).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Remove the Bitcoin RPC 60-second gate that blocked 13+ dependent containers
(mempool, electrumx, btcpay, lnd, fedimint) from being created on first boot.
Containers now always get created and auto-restart via health monitor once
Bitcoin becomes responsive — the designed recovery path.
Additional hardening:
- Validate archy-net creation with retry (silent failure broke DNS)
- Verify critical images are loaded, re-load from tarballs if missing
- Create SearXNG settings.yml before container start (was missing)
- Run reconciler automatically after first-boot failures
- Add load-images as explicit systemd dependency with 900s timeout
- Propagate config write errors in install.rs (bitcoin.conf, lnd.conf)
- FileBrowser password change: retry loop (6 attempts) + 0o600 perms
- Post-start verification: detect containers that exit immediately
- Add 2s dependency waits between container starts
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Backend reads onion addresses from /var/lib/archipelago/tor-hostnames/.
This dir was never created on fresh installs, breaking connect wallet
and tor address display. Now copies from system Tor hidden service dirs.
Also fixed log() function ordering.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The bitcoin-ui nginx proxy needs Basic Auth to talk to Bitcoin Core RPC.
The __BITCOIN_RPC_AUTH__ placeholder was not being replaced, causing a
browser login prompt. Now injects creds from secrets dir before build.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Tor was configured in torrc but never started by first-boot-containers.sh.
Connect wallet and .onion services were broken on fresh installs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Chromium kiosk: add --disable-gpu-compositing, --disable-gpu-rasterization,
--disable-software-rasterizer, --renderer-process-limit=1
drops GPU process from 64% to 12% CPU
- Container healthchecks: 30s to 120s interval in first-boot and reconcile
- AppCard: min-height on description so cards dont shift
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
All container image references now pull from 80.71.235.15:3000/archipelago/
instead of Docker Hub and ghcr.io. image-versions.sh is the single source
of truth; all scripts use $*_IMAGE variables instead of hardcoded refs.
Files updated:
- scripts/image-versions.sh: central ARCHY_REGISTRY variable
- core/*/config.rs: registry whitelist includes app registry
- core/*/stacks.rs: Immich + Penpot stack images
- scripts/{first-boot,deploy-to-target,container-specs}.sh: use variables
- docker/*/Dockerfile: nginx base image from registry
- image-recipe/: ISO build, podman config, menu script
- scripts/{container-doctor,deploy-bitcoin-knots,fix-indeedhub,validate-app-manifest}.sh
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- S10: Add warnings to silent health check failures in deploy scripts
- S11: Add trap cleanup for temp dirs in deploy and tailscale scripts
- S12: Quote 20+ critical unquoted variables across deploy scripts
- S13: Extract hardcoded IPs to deploy-config-defaults.sh
- S15: Add --memory=256m to UI container runs
- F16: Remove in-memory JWT, use cookie-only auth in filebrowser client
- F17: Add meta tag fallback for CSRF token in RPC client
- F19: Track and clear setTimeout in AppSession on unmount
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- F4: Fetch fresh server state after WebSocket reconnect
- F5: Guard message polling timer with auth check, stop on logout
- F6: Remove NIP-07 listener in appLauncher close()
- F7: Initialize audio player once to prevent listener stacking
- S3: Pin all container images to specific versions, create image-versions.sh
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- F1: Guard connectWebSocket against concurrent calls with isWsConnecting flag
- F2: Serialize mesh send operations with sendQueue to prevent fetchMessages races
- F3: Add global Vue error handler with toast notification
- S1: Replace sudo podman with podman across all scripts (rootless Podman)
- S2: Add health-cmd to all 40 container run commands in first-boot-containers.sh
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Part 1 — DID Persistence:
- Deploy script creates /var/lib/archipelago/identity/ directory
- First-boot script creates identity dir with proper ownership
- Identity load now logs pubkey to confirm persistence across restarts
Part 2 — Node Names:
- NodeStateSnapshot includes node_name field
- build_local_state() passes server name to sync responses
- update_node_state() stores peer's announced name on the FederatedNode
- Names propagate automatically during federation.sync-state
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Ensures LND Connect works through every deployment path:
- Nginx: CORS $http_origin on /lnd-connect-info (both HTTP+HTTPS)
- Nginx: no cookie gate (backend is 127.0.0.1-only)
- LND UI source: fetch with credentials: 'include'
- Deploy: rebuilds LND UI with --no-cache every deploy
- First-boot: --restart unless-stopped + memory limits on UI containers
- Backend: bound to 127.0.0.1:5678 in systemd service
Root cause was CORS: LND UI on :8081 fetching :80 is cross-origin.
Browser blocked reading the 200 response without CORS headers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Bitcoin Knots: added -proxy=127.0.0.1:9050 for P2P connections through Tor
- LND: enabled tor.active=true, tor.socks, tor.streamisolation in lnd.conf
- Tor setup handled by existing archipelago-setup-tor.service at first boot
- .onion display and Tor toggle already present in Settings UI
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Generate unique random passwords at first boot for Bitcoin RPC, all database
services (mempool, btcpay, immich, penpot, mysql-root), and Fedimint gateway.
Credentials stored in /var/lib/archipelago/secrets/ with 600 permissions.
Scripts: first-boot-containers.sh, deploy-to-target.sh, deploy-bitcoin-knots.sh,
container-doctor.sh all read from secrets files instead of hardcoded values.
Rust backend: new bitcoin_rpc module reads password from secrets file, env var,
or dev fallback. All .basic_auth() calls and container config strings now use
the shared credential reader instead of hardcoded "archipelago123".
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- LND UI: replace cdn.tailwindcss.com with local tailwind.css (CSP fix)
- LND UI: make asset paths relative for nginx proxy compatibility
- Web5 wallet: add QR code for on-chain receive addresses (qrcode npm)
- Web5 wallet: hide incoming transactions after 3 confirmations
- Apps: add "Services" tab to separate backend containers from user apps
- Home: null guard on packages.value to prevent TypeError on load
- First-boot: auto-create Bitcoin Knots wallet (no longer auto-created)
- AppSession: add mempool-electrs to port mapping
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
