6fee6befed
- Added new dependencies: `adler2`, `crc32fast`, `flate2`, `miniz_oxide`, and `libredox`. - Updated existing dependencies: `tokio-rustls` to version 0.26.4 and `filetime` to version 0.2.27. - Removed the `backup.rs` file as it is no longer needed. - Introduced tests for configuration and credential management. - Enhanced the `identity` module to generate W3C compliant DID documents. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
79 lines
2.5 KiB
Markdown
79 lines
2.5 KiB
Markdown
# ARM64 Raspberry Pi 5 Testing Guide
|
|
|
|
## Prerequisites
|
|
|
|
- Raspberry Pi 5 (4GB+ RAM recommended)
|
|
- USB flash drive (16GB+) for the installer
|
|
- MicroSD card or NVMe SSD for the target install
|
|
- Monitor + keyboard (or serial console for headless setup)
|
|
- Ethernet connection (WiFi can be configured after install)
|
|
|
|
## Building the ARM64 ISO
|
|
|
|
On the build server (192.168.1.228):
|
|
|
|
```bash
|
|
cd ~/archy/image-recipe
|
|
sudo ARCH=arm64 ./build-auto-installer-iso.sh
|
|
# Output: results/archipelago-installer-arm64.iso
|
|
```
|
|
|
|
## Flashing to USB
|
|
|
|
```bash
|
|
# On macOS
|
|
diskutil list # identify USB drive
|
|
diskutil unmountDisk /dev/diskN
|
|
sudo dd if=results/archipelago-installer-arm64.iso of=/dev/rdiskN bs=4m
|
|
|
|
# On Linux
|
|
sudo dd if=results/archipelago-installer-arm64.iso of=/dev/sdX bs=4M status=progress
|
|
```
|
|
|
|
Or use Balena Etcher for a GUI approach.
|
|
|
|
## Testing Checklist
|
|
|
|
### Boot & Install
|
|
- [ ] RPi 5 boots from USB drive (may need to enable USB boot in EEPROM)
|
|
- [ ] Auto-installer detects target disk (NVMe/SD)
|
|
- [ ] Installation completes without errors
|
|
- [ ] System reboots into installed OS
|
|
|
|
### First Boot
|
|
- [ ] Archipelago service starts (`systemctl status archipelago`)
|
|
- [ ] Nginx starts and serves UI
|
|
- [ ] Web UI loads in browser at `http://<pi-ip>`
|
|
- [ ] Onboarding flow completes
|
|
- [ ] Login works with default password
|
|
|
|
### Container Stack
|
|
- [ ] Podman runs on ARM64 (`podman version`)
|
|
- [ ] Bitcoin Knots installs and syncs
|
|
- [ ] LND installs and connects to Bitcoin
|
|
- [ ] Electrs installs and indexes
|
|
- [ ] Mempool installs and shows data
|
|
- [ ] FileBrowser installs and serves files
|
|
|
|
### Performance
|
|
- [ ] Backend response time < 200ms for RPC calls
|
|
- [ ] UI renders smoothly (no jank)
|
|
- [ ] Container startup time reasonable (< 30s per app)
|
|
- [ ] Memory usage stable (no leaks over 24h)
|
|
|
|
## Known RPi 5 Considerations
|
|
|
|
1. **USB Boot**: RPi 5 needs EEPROM update for USB boot. Run `sudo rpi-eeprom-update` on a stock Raspberry Pi OS first.
|
|
2. **NVMe**: RPi 5 supports NVMe via the M.2 HAT. Recommended for performance.
|
|
3. **Power**: Use the official 27W USB-C power supply. Underpowered supplies cause throttling.
|
|
4. **Thermals**: Consider a heatsink or active cooling case for sustained Bitcoin node operation.
|
|
5. **Storage**: Bitcoin blockchain requires ~600GB+. Use NVMe or external SSD.
|
|
|
|
## Reporting Issues
|
|
|
|
Document any ARM64-specific issues found during testing:
|
|
- Architecture-specific container failures
|
|
- Performance differences vs x86_64
|
|
- Hardware compatibility problems
|
|
- Missing kernel modules or firmware
|