ssmithx
3925843455
RNS's own rnodeconf utility (frequency/bandwidth/spreading-factor/coding-rate read+write, firmware signature verification, board bootstrap) has been the one tool that reliably diagnoses real RNode hardware — it's what finally proved two live nodes were silently running at different spreading factors (SF5 vs SF10, invisible from any of our own probe/logging code, and the actual reason two correctly-flashed radios could detect each other's RF but never decode a packet). Every node should have it, not just whichever one an agent happened to build a throwaway venv on to debug a specific incident. - reticulum-daemon/build.sh: also PyInstaller-package archy-rnodeconf alongside the existing archy-reticulum-daemon, same --collect-submodules/ -d noarchive flags (same RNS.Interfaces __all__-glob requirement applies). - scripts/deploy-to-target.sh: actually wire both packaged binaries into the live deploy path (neither was wired in before — a pre-existing gap noted in docs/RETICULUM-TRANSPORT-PROGRESS.md; this is why reticulum-daemon previously only worked via manual dev-venv setup on rsync-deployed nodes, not the ISO-imaged ones). Non-fatal on build/deploy failure — archipelago already falls back to its dev-venv path if the packaged binary is absent. Also installs the missing `python3.<minor>-venv` package when needed (same "ensurepip not available" gap hit manually twice this session). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
55 lines
2.7 KiB
Bash
Executable File
55 lines
2.7 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Build the PyInstaller single-binaries for the OTA (plan Phase 1 packaging).
|
|
# Outputs: dist/archy-reticulum-daemon, dist/archy-rnodeconf — drop both next
|
|
# to /usr/local/bin/archipelago.
|
|
set -euo pipefail
|
|
cd "$(dirname "${BASH_SOURCE[0]}")"
|
|
|
|
if [ ! -d .venv ]; then
|
|
python3 -m venv .venv
|
|
fi
|
|
.venv/bin/pip install -q -r requirements.txt -r requirements-build.txt
|
|
|
|
rm -rf build dist archy-reticulum-daemon.spec archy-rnodeconf.spec
|
|
|
|
# --collect-submodules: RNS/LXMF load most of their own internals dynamically
|
|
# (interface drivers, transport backends), which PyInstaller's static import
|
|
# analysis can't see from a plain `import RNS`.
|
|
#
|
|
# -d noarchive is NOT optional: RNS.Interfaces/__init__.py builds its
|
|
# `__all__` by glob-ing *.py/*.pyc next to its own `__file__` at import time
|
|
# (`from RNS.Interfaces import *` in Reticulum.py relies on that). PyInstaller
|
|
# normally zips pure-Python modules into an in-binary PYZ archive, so
|
|
# `__file__` doesn't point at a real directory and the glob comes back empty
|
|
# -> `NameError: name 'Interface' is not defined` at RNS.Reticulum() bring-up.
|
|
# noarchive keeps modules as loose .pyc files on disk so the glob still works.
|
|
.venv/bin/pyinstaller --onefile --name archy-reticulum-daemon --clean --noconfirm \
|
|
--collect-submodules RNS \
|
|
--collect-submodules LXMF \
|
|
--collect-data RNS \
|
|
-d noarchive \
|
|
reticulum_daemon.py
|
|
|
|
echo "Built dist/archy-reticulum-daemon ($(du -h dist/archy-reticulum-daemon | cut -f1))"
|
|
|
|
# archy-rnodeconf: RNS's own official RNode config/diagnostic tool
|
|
# (RNS.Utilities.rnodeconf — reads/sets frequency, bandwidth, spreading
|
|
# factor, coding rate, TX power on an attached RNode; also verifies firmware
|
|
# signatures and can flash/bootstrap a board). Shipped alongside the daemon
|
|
# so every node can inspect and reconfigure its own radio without needing a
|
|
# full RNS/Python dev environment set up by hand — see the checkpoint in
|
|
# docs/RETICULUM-TRANSPORT-PROGRESS.md for the incident (two nodes silently
|
|
# running at different spreading factors, invisible without this tool) that
|
|
# motivated shipping it as a first-class OS tool rather than an ad hoc script.
|
|
RNODECONF_SRC="$(find .venv/lib -maxdepth 5 -path '*/site-packages/RNS/Utilities/rnodeconf.py' -print -quit)"
|
|
if [ -n "$RNODECONF_SRC" ] && [ -f "$RNODECONF_SRC" ]; then
|
|
.venv/bin/pyinstaller --onefile --name archy-rnodeconf --clean --noconfirm \
|
|
--collect-submodules RNS \
|
|
--collect-data RNS \
|
|
-d noarchive \
|
|
"$RNODECONF_SRC"
|
|
echo "Built dist/archy-rnodeconf ($(du -h dist/archy-rnodeconf | cut -f1))"
|
|
else
|
|
echo "WARNING: rnodeconf.py not found at $RNODECONF_SRC (RNS version mismatch?) — skipping archy-rnodeconf build" >&2
|
|
fi
|